Search Our Site

Become a Program Member!

CONSTELLATION NUCLEAR, LLC
NINE MILE POINT NUCLEAR POWER STATION, LLC

Instrumentation and Controls

• Organization Directory Page
  (titles of all evaluated learning experiences, organization description, and source of official student records)

• Titles of all evaluated learning experiences in the Instrumentation and Controls section

• Descriptions and credit recommendations

Titles, descriptions, and credit recommendations for all learning experiences recommended for college credit within the Instrumentation and Controls section can be found below. To locate information on additional learning experiences, which have also been recommended for college credit, use the Organization Directory Page link above for a complete list of titles for all learning experiences or use the following links to go directly to other sections: 

Auxiliary Operator Training
Chemistry/Radiation Protection Training
Electrical Maintenance
General Courses
Mechanical Maintenance
Reactor Operator/Senior Reactor Operator Training

Titles of all evaluated learning experiences in the Instrumentation and Controls section

NOTE: When a credit recommendation is no longer active, the course description may be abbreviated. The last edition of the Directory in which complete information can be found is indicated on the course exhibit. Complete information can also be obtained by contacting National PONSI.

Acurex (CM1-INIT-206)
Bailey 7000 (IC3-ADVN-303)
Basic Skills - Test Equipment (IC3-INIT-108)
Basic Skills Technical Skills (IC3-INIT-110)
Data Communications (CM3-INIT-101)
Digital Electronics (IC3-INIT-107)
Feedwater Control (IC1-ADVN-417)
Feedwater Control (IC2-ADVN-517)
Foxboro Spec 200 (IC3-ADVN-301)
GEMAC 5000 (IC3-ADVN-300)
Microprocessors (CM3-INIT-100)
Nuclear Instrumentation (IC1-ADVN-404)
Operational Amplifiers (IC3-INIT-106)
Print Reading - Unit 1 (IC1-INIT-204)
Print Reading - Unit 2 (IC2-INIT-205)
Process Control (IC3-INIT-214)
Process Controls Phase 1 (IC3-INIT-211)
Process Controls Phase 2 (IC3-INIT-212)
Process Controls  Phase 3 (IC3-INIT-213)
Programmable Controllers - Allen Bradley (IC3-ADVN-302-05)
Programmable Controllers - Generic (IC3-ADVN-302-00) (first entry)
Programmable Controllers - Generic (IC3-ADVN-302-00) (second entry)
Programmable Controllers - Modicom (IC3-ADVN-302-04)
Reactor Manual Control (IC2-ADVN-502)
Soldering Techniques (IC3-INIT-108)
Tube Bending (IC3-INIT-210)
Unit 1 Computer Systems Overview (CM1-INIT-100)

Descriptions and credit recommendations

INSTRUMENTATION AND CONTROLS

Acurex (CM1-INIT-206)
Dates: October 1991 - November 1991.
Credit recommendation: In the lower division baccalaureate/associate degree category, 1 semester hour in Industrial Instrumentation (5/92). NOTE: Complete information on this course last appeared in the 1996 edition.

Bailey 7000 (IC3-ADVN-303)
Dates: February 1991 - May 1997.
Credit recommendation: In the lower division baccalaureate/ associate degree category, 2 semester hours in Control Systems, Industrial Instrumentation, or Process Control (5/92). NOTE: Complete information on this course last appeared in the 2000 edition.

1. Basic Skills Technical Skills (IC3-INIT-110)
2. Tube Bending (IC3-INIT-210)
Dates: 1. July 1991 - June 1997.
2. September 1990 - June 1997.
Credit recommendation: Courses 1 and 2: In the lower division baccalaureate/associate degree category, 2 semester hours as Shop Practices in Electrical Construction and Maintenance (6/92). NOTE: Courses 1 and 2 must both be completed to receive credit. NOTE: Complete information on these courses last appeared in the 2000 edition.

Basic Skills - Test Equipment (IC3-INIT-108)
Dates: July 1991 - May 1997.
Credit recommendation: In the lower division baccalaureate/associate degree category, 3 semester hours in Electrical Instruments in Electrical Technology (5/92). NOTE: Complete information on this course last appeared in the 2000 edition.

Data Communications (CM3-INIT-101)
Dates: August 1991 - May 1997.
Credit recommendation: In the lower division baccalaureate/associate degree category, 2 semester hours in Data Communications in Telecommunications Technology (5/92). NOTE: Complete information on this course last appeared in the 2000 edition.

Digital Electronics (IC3-INIT-107)
Dates: January 1992 - May 1997.
Credit recommendation: In the lower division baccalaureate/associate degree category, 3 semester hours in Digital Circuits in an Electrical/Electronics Engineering Technology curriculum (5/92). NOTE: Complete information on this course last appeared in the 2000 edition.

Feedwater Control (IC1-ADVN-417)
Dates: December 1991 - June 1997.
Credit recommendation: In the lower division baccalaureate/associate degree category, 2 semester hours in Engineering Technology or Industrial Instrumentation (6/92). NOTE: This course and Feedwater Control (IC2-ADVN-517) cover similar topics. If both courses are successfully completed, credit should be awarded for only one course. NOTE: Complete information on this course last appeared in the 2000 edition.

Feedwater Control (IC2-ADVN-517)
Dates: December 1991 - June 1997.
Credit recommendation: In the lower division baccalaureate/associate degree category, 2 semester hours in Engineering Technology or Industrial Instrumentation (6/92). NOTE: This course and Feedwater Control (IC1-ADVN-417) cover similar topics. If both courses are successfully completed, credit should be awarded for only one course. NOTE: Complete information on this course last appeared in the 2000 edition.

Foxboro Spec 200 (IC3-ADVN-301)
Dates: February 1990 - May 1997.
Credit recommendation: In the lower division baccalaureate/associate degree category, 2 semester hours in Industrial Instrumentation or Process Control in Engineering Technology (5/92). NOTE: Complete information on this course last appeared in the 2000 edition.

GEMAC 5000 (IC3-ADVN-300)
Dates: January 1991 - May 1997.
Credit recommendation: In the lower division baccalaureate/associate degree category, 2 semester hours in Process Control or Industrial Instrumentation (5/92). NOTE: Complete information on this course last appeared in the 2000 edition.

Microprocessors (CM3-INIT-100)
Dates: April 1991 - May 1997.
Credit recommendation: In the lower division baccalaureate/associate degree category, 1 semester hour in Microprocessor Fundamentals in Electrical/Electronics Engineering Technology (5/92). NOTE: Complete information on this course last appeared in the 2000 edition.

Nuclear Instrumentation (IC1-ADVN-404)
Dates: September 1991 - May 1997.
Credit recommendation: In the lower division baccalaureate/associate degree category, 3 semester hours in Nuclear Instrumentation in Nuclear Engineering Technology (5/92). NOTE: Complete information on this course last appeared in the 2000 edition.

Operational Amplifiers (IC3-INIT-106)
Dates: September 1992 - May 1997.
Credit recommendation: In the lower division baccalaureate/ associate degree category, 2 semester hours in Op-Amp Theory in Electronics Technology (5/92). NOTE: Complete information on this course last appeared in the 2000 edition.

Print Reading - Unit 1 (IC1-INIT-204)
Dates: October 1991 - June 1997.
Credit recommendation: In the associate degree/certificate category, 1 semester hour as Blueprint Reading (6/92). NOTE: This course and Print Reading-Unit 2 cover similar topics. If both courses are successfully completed, credit should be awarded for only one course. NOTE: Complete information on this course last appeared in the 2000 edition.

Print Reading - Unit 2 (IC2-INIT-205)
Dates: October 1991 - June 1997.
Credit recommendation: In the associate degree/certificate category, 1 semester hour as Blueprint Reading (6/92). NOTE: This course and Print Reading-Unit 1 cover similar topics. If both courses are successfully completed, credit should be awarded for only one course. NOTE: Complete information on this course last appeared in the 2000 edition.

Process Control (IC3-INIT-214)
(Formerly Process Controls Phase 1 (IC3-INIT-211), Process Controls
Phase 2 (IC3-INIT-212), and Process Controls  Phase 3 (IC3-INIT-213)
Dates: Version 1: 1. September 1991 - July 1994.
2. January 1992 - July 1994.
3. February 1992 - July 1994.
Version 2: August 1994 - June 1997.
Credit recommendation: Version 1, Courses 1, 2, and 3 or Version 2: In the lower division baccalaureate/associate degree category, 5 semester hours (3 lecture, 2 laboratory) in Process Control or Industrial Instrumentation (6/92). NOTE: Courses 1, 2, and 3 must be completed to receive credit. NOTE: Complete information on this course sequence last appeared in the 2000 edition.

1. Programmable Controllers - Generic (IC3-ADVN-302-00)
2. Programmable Controllers - Allen Bradley (IC3-ADVN-302-05)
Dates:1. June 1991 - May 1997.
2. June 1991 - May 1997.
Credit recommendation: Courses 1 and 2: In the lower division baccalaureate/associate degree category, 2 semester hours in Electrical Power Technology or Engineering Technology (5/92). NOTE: Courses 1 and 2 must both be completed to receive credit. NOTE: This course grouping overlaps in content with the course grouping containing Programmable Controllers - Modicom. If the three courses comprising these two groups are successfully completed, a maximum of 3 semester hours of credit is recommended. NOTE: Complete information on these courses last appeared in the 2000 edition.

1. Programmable Controllers - Generic (IC3-ADVN-302-00)
2. Programmable Controllers - Modicom (IC3-ADVN-302-04)
Dates:1. June 1991 - May 1997.
2. July 1990 - May 1997.
Credit recommendation: Courses 1 and 2: In the lower division baccalaureate/associate degree category, 2 semester hours in Electrical Power Technology or Engineering Technology (5/92). NOTE: Courses 1 and 2 must both be completed to receive credit. NOTE: This course grouping overlaps in content with the course grouping containing Programmable Controllers - Modicom. If the three courses comprising these two groups are successfully completed, a maximum of 3 semester hours of credit is recommended. NOTE: Complete information on these courses last appeared in the 2000 edition.

Reactor Manual Control (IC2-ADVN-502)
Dates: December 1991 - May 1997.
Credit recommendation: In the lower division baccalaureate/ associate degree category, 4 semester hours (3 lecture, 1 laboratory) in an Engineering Technology curriculum (5/92). NOTE: Complete information on this course last appeared in the 2000 edition.

Soldering Techniques (IC3-INIT-108)
Dates: January 1991 - December 1993.
Credit recommendation: In the lower division baccalaureate/ associate degree category, 1 semester hour (shop) in Electrical Construction and Maintenance or Electronics Service Technology (5/92). NOTE: Complete information on this course last appeared in the 1996 edition.

Unit 1 Computer Systems Overview (CM1-INIT-100)
Dates: May 1991 - June 1997.
Credit recommendation: In the lower division baccalaureate/ associate degree category, 2 semester hours as Computer Applications in Engineering Technology (6/92). NOTE: Complete information on this course last appeared in the 2000 edition.

Updated 2/2/04

Return to all CCR Online  listings